|
 |
Die casting
|
|
|
|
 |
|
Die-casting is similar to permanent mold casting except that the metal is injected into the mold under high pressure of 10-210Mpa (1,450-30,500) psi . This results in a more uniform part, generally good surface finish and good dimensional accuracy, as good as 0.2 % of casting dimension. For many parts, post-machining can be totally eliminated, or very light machining may be required to bring dimensions to size. Die-casting can be done using a cold chamber or hot chamber process. |
|
|
|
 |
| Product process |
| Investment casting |
|
| If you have ever wondered which process you can use to achieve a design exhibiting cavities, containing many corrugations or ... |
|
|
|
| Sand casting |
|
|
Sand casting is used to make large parts (typically Iron, but also Bronze, Brass, Aluminum). Molten metal is poured into a ... |
|
|
|
| Forging parts |
|
|
Forging is the process by which metal is heated and is shaped by plastic deformation by suitably applying compressive force... |
|
|
|
| Stamping parts |
|
| Stamping includes a variety of sheet-metal forming manufacturing processes, such as punching using a machine press or stampin... |
|
|
|
| Turning parts |
|
| Machining is one of our strongest businesses and can produce the greatest cost savings for customers. Machining general... |
|
|
|
| Die casting |
|
| Die-casting is similar to permanent mold casting except that the metal is injected into the mold under high pressure of 10-21... |
|
|
|
|
|
|
